Military

It's no surprise that some of the most extreme operating conditions are encountered by our U.S. Military. Clark Testing has the experience and resources to make sure your products are qualified to meet these conditions.

Shock & Vibration	Per Mil 167, 810, 901D, 10 lb to 30,000 lb capacity (Vibration) Multiple shakers 250 lb to 7,500 lb capacity (Shock)
Thermal Shock	Per Mil 810, ASTM, SAE, custom profiles Extreme High / Low Temp. range Rapid transition times
Accelerated Aging	Per Mil 810, ASTM, SAE, custom profiles Humidity High / low temperature conditioning Corrosion / Salt fog
EMC/EMI	Per Mil 461, CE Mark, CISPER II Multiple chambers 3 meter shielded semi-anechoic chamber 2,500 lb turntable capacity
Fuels & Lubrcations	Per ASTM, DIN, ISO, AISE Timken Four-Ball EP Four Ball Wear Pin & Vee FZG Hydraulic Pump Wear - Also Misting Properties Flash Demulsibility Distillation Pour & Cloud Point
Condition Monitoring (CMS)	Per ASTM Dynamic Demulsibility Endurance (DDE) Viscosity FTIR AE Spec Karl Fischer and Particle Count
Hydraulics	Per SAE, ASME, ANSI, Mil Std's High Pressure Impulse / Stroke Testing Hydrostatic load and burst testing Pump flow testing Wide range of component testing
Structural	Per SAE, ASME, ANSI, FMVSS/CMVSS 207& 210, Mil Std's Load and Fatigue performance evaluation Component and frame testing 1.5 million lbs load capacity Linear Actuators with capacity of 400,000 lbf
Powertrain	Per DOT, SAE, SAE J1374, SAE J1400, ASME, ISO, Mil Std's, EPA Up to 2,000hp Full vehicle component testing Ultra High Torque Dynamometers (Drive and Absorbing) Chassis Dynamometers Inertia Simulation